Home |  About us |  eServices
 
Find Us On Facebook   MSC Southeast on YouTube   MSC Southeast on LinkedIn   Tweet with MSC Southeast

Electronics Technology

Take on today's sweeping technological changes.

All Programs Request Information Apply Now!
 
  1. Electronics Technology
  2. Electronics Technology - AAS

Electronics Technology - AAS

1) Must complete a minimum of 3 different MnTC goals in Liberal Arts and Sciences

2) 1100 or higher Liberal Arts and Sciences courses required unless specified

GENERAL EDUCATION REQUIREMENTS
3 cr
3 cr
Goal 4: Mathematics
Choose one Goal 4 course
3 cr
3 cr
3 cr
 
15 crs
TECHNICAL REQUIREMENTS
Technical electives (see advisor for approved electives)
Choose one or more Technical electives.
3 cr
ELEC1202
Introduction to DC Electricity
This course covers the general information, theory, and problem-solving techniques required for an analysis of DC circuits with emphasis on the meter measurements, current flow, and voltage division. (Prerequisite: Proficient in basic math) (2 credits: 1 lecture/1 lab)

Download the Course Outline

2 cr
ELEC1204
Introduction to AC Electricity
This course covers the general information, theory, and problem-solving techniques required for an analysis of AC circuits. Topics include: AC waveforms, oscilloscope operation, meter measurements, and AC vs. DC comparisons. (Prerequisites or Concurrent: ELEC1202, proficiency in basic math) (2 credits: 1 lecture/1 lab)

Download the Course Outline

2 cr
ELEC1209
DC Theory & Circuits
This course covers the study of Ohm's Law, Kirchoff's Law and network theorems, with an emphasis on the theoretical concepts as related to electricity/electronics. The application of DC theory through laboratory experiments are also examined. Instruction in the operation of basic test equipment is used to provide verification of topics and to reinforce the theory. (Prerequisite or Concurrent PHYS1515 or ELEC1202) (2 credits: 1 lecture/1 lab)

Download the Course Outline

2 cr
ELEC1212
Digital Electronics I
Students will learn what a digital circuit is and how digital circuits are used in electronic equipment, from simple clocks to large computers. Experimentation with digital circuits will aid in the reinforcement of digital concepts. (Prerequisite: None) (3 credits: 2 lecture/1 lab)

Download the Course Outline

3 cr
ELEC1214
Electronic Fabrication Technology
In this course students will study the proper techniques necessary for placement of components on PCB's, with emphasis on THM and SMT technologies. Proper use of standard and specialized tools and equipment will be demonstrated. Soldering techniques will be critiqued in accordance with IPC-A-610 and J-STD-001 soldering standards. (Prerequisite: None) (2 credits: 1 lecture/1 lab)

Download the Course Outline

2 cr
ELEC1220
Electronic Communications
This course presents an overview of electronic communication systems and principles. Amplitude Modulation, Frequency Modulation, and Multiplexing Fundamentals. Practical experiments will reinforce many points presented in Electronics Communications. (Prerequisites: ELEC1202, ELEC1204) (2 credits: 1 lecture/1 lab)

Download the Course Outline

2 cr
ELEC1250
Introduction to Solid State
A theoretical understanding of solid-state devices, which includes diodes, bipolar transistors, field effect transistors, SCR's, triacs, and others, and their operation in both DC and AC circuits will be covered. Analysis of these operations will be demonstrated through the lab exercises and proper use of test equipment. Proper biasing of solid state devices is stressed. (Prerequisites: ELEC1202, ELEC1204) (4 credits: 2 lecture/2 lab)

Download the Course Outline

4 cr
ELEC1251
Solid State Devices
An in-depth understanding of solid state circuit configurations and operations will be enhanced through both theoretical and experimental exercises. Topics of interest will be Transistor amplifiers, Mosfets, Operational Amplifiers, Solid State switching circuits and Voltage regulators. (Prerequisite or Concurrent: ELEC1250) (4 credits: 2 lecture/2 lab)

Download the Course Outline

4 cr
ELEC1330
Introduction to Instrumentation & Control
This course is an introduction to sensing, instrumentation and control using National Instruments hardware and software (such as MultiSim, LabView, and the MyDAQ). Pre-built applets will be used to input and output data from digital and analog interfaces, make logical decisions based upon input, and data processing. Devices interfacing with this tool may include, but are not limited to photo-electric sensors, servos, and LEDs. Upon completion, students should have a cursory understanding of how National Instruments hardware and software tools can be used for data acquisition, control, and instrumentation environments. (Prerequisite: none) (2 credits: 1 lecture/1 lab)

Download the Course Outline

2 cr
ELEC1500
Networking I
This course provides an introduction to network systems. The student will learn about the basic concepts, terminology, equipment, and the techniques that are needed in the development of a data communication system. The protocols used for typical data exchange will be explored in a lab environment. This is semester one of the Cisco curriculum. (Prerequisites: None.) (3 credits: 2 lecture/1 lab)

Download the Course Outline

3 cr
ELEC2211
Digital Electronics II
Digital electronics are so widely used that it is almost impossible to think of electronic equipment without them. Digital circuits have greatly improved electronic methods and have given practical electronic equipment amazing capabililty. In this course you will learn what digital electronics is, how they are used to reduce board area, improve reliability and increase performance. (Prerequisite: ELEC1212) (4 credits: 2 lecture/2 lab)

Download the Course Outline

4 cr
ELEC2227
PC Hardware & OS
This course will explore the personal computer. Emphasis will be placed on the managing, monitoring and optimizing of the PC. Basic troubleshooting techniques will be discussed as it relates to the Personal Computer. The use of diagnostic and monitoring software will be emphasized. Topics covered provide a preparation for CompTia A+ certification. (Prerequisite: ELEC1500 Networking I) (4 credits: 3 lecture/1 lab)

Download the Course Outline

4 cr
ELEC2230
Microcontroller Applications
This course will introduce the student to embedded controllers. The student will configure microcontrollers to read switches and drive output devices. Students will explore the features and benefits of single chip systems. (Prerequisites: ELEC2211 Digital Electronics I I) (5 credits: 3 lecture/2 lab)

Download the Course Outline

5 cr
ELEC2260
Linear Integrated Circuits
This course covers linear integrated circuits. In this course a wide variety of amplifiers, oscillators and generators will be analyzed, which use the op amp. The op amp is one of the most versatile integrated circuits; it provides high gain and wideband width in a simple configuration. (Prerequisite: ELEC1218) (4 Credits: 2 lecture/2 lab)

Download the Course Outline

4 cr
ELEC2500
Networking II
This course will cover the components of local area networks well as some of the standards and connections used. The student will configure routers, switches, and wireless devices.. Students will explore the features and benefits of wireless devices and virtual LANs. . (Prerequisites: ELEC1500 Networking I) (3 credits: 2 lecture/1 lab)

Download the Course Outline

3 cr
 
49 crs

Total Credit Requirement - 64

Estimated Costs for this Major
Approximate Tuition/Fees:$12,772
Minimum Tool Cost:$50
Books/Supplies:$1,200
Estimated Total:$14,022
 

 

© 2018 Minnesota State College Southeast

RED WING CAMPUS | 308 Pioneer Road | Red Wing, MN 55066 | 651-385-6300
WINONA CAMPUS | 1250 Homer Road | Winona, MN 55987 | 507-453-2700

Minnesota State College Southeast is an affirmative action/equal opportunity educator and employer. ADA accessible. MSC Southeast is committed to a policy of nondiscrimination in employment and education opportunity. No person shall be discriminated against in the terms and conditions of employment, personnel practices, or access to and participation in, programs, services, and activities with regard to race, sex, color, creed, religion, age, national origin, disability, marital status, status with regard to public assistance, or sexual orientation. In addition, discrimination in employment base on membership or activity in a local commission as defined by law is prohibited.

 

Minnnesota State Logo

Minnesota State College Southeast
A member of Minnesota State

This document is available in alternative formats to individuals with disabilities by calling 877-853-8324 or 507-453-2700.